Offices are often a part of the building that is occupied for long hours, it is very important to maintain the office/s for the well being of the office occupant/s. Quality cleaning is important, be it hard floor cleaning or proper vacuum with quality vacuum equipment. Walls and ceilings will also need cleaning periodically, nothing is worse than using an office with soiled and/or worn walls. Air-conditioning filters also need to be cleaned frequently, in a timely manner.
Soft wash of building elements is focused on maintaining building material and finishes to increase durability whilst also increasing the appearance of building elements. This requires scrubbing, washing and a degree of polishing of the elements exposed surfaces.
Having worked in the building industry in Australia and abroad since 1977, I have accumulated a unique skill set over many years. This inturn has given me an insite as to the importance of maintaining building elements.
Maintenance: Maintenance is key to durability of buildings, is key to health & wellbeing of building occupants, a good soft wash rejuvenates building elements.
Pest Control has been a life long passion, although my vehicle is well equipped to deal with any pest control matter deemed necessary, the ability to thoroughly clean the kitchen, undertake dewebbing, clean rodent run markings, clean flooring/drains for more effective pest control, termite control or inspections can no longer be undertaken. Call Steve for more detail.
SoftWash - Washing of building elements without use of high pressure washer, use of a high pressure washers can be very destructive to building elements, a soft wash not only improves the appearance of a building, but also increases the durability of the building elements, pest control treatments are more effective when combined with soft wash.
Hard Floor Cleaning - A difficult task is to properly clean hard flooring. Breaking through oily residues for example in food preperation areas, commercial toilet floors or cleaning a well worn floor has been challenging, to say the least, Washing a floor properly improves health and ammenity whilst also improving the floors visual appeal.
Modern offices often have a lot of glass, glass partitions, glass doors, glass windows or glass notice boards for example.Nothing is more important in an office environment than the overall presentation. Clients visiting clean offices will normally get an impression of a well run business. Employees that work in a clean, tidy office environment will become a lot more organised, this then translate to being more organised in their work practices making them more relaxed and more efficient. It is hard to qunitfy the tangible benefites of a clean, polished office where the glass is so clean it can not be seen.
Glass Elements of buildings include windows, mirrors and glass balustrades for example. Glass needs to be clean for intended transparency, all glass has a rough surface when observed under a microscope. What I do that is different, is that I formulate cleaning fluids that alter the refraction of light off the glass surfaces when applied together with a light polishing. My glass cleaning formulations contain a palm based wax that provides a lasting sheen to the glass, this sheen or polished surface is slippery and dust/dirt does not reaccumulate in the normal manner, leaving the glass cleaner for longer. An added benefit is that the home owner can easily clean off finger prints or other minor blemishes by simply using a moist paper towel followed by a dry paper towel.
Stainless Steel - Most grades of stainless steel are prone to surface discolouration or corrosion over time, tea stains and mild surface rust together with grime build up cause the chromium in stainless steel to loose it's active layer, the stainless steel becomes active. I have a method I use to repassivate the stainless steel, effectively reoxidising the chromium in stainless to form the desired protective layer.
Colorbond Maintenance- Colorbond is a material widely used in buildings, external metal details need ongoing periodic maintenance. Colorbond should be washed with a mild soap then rinsed with water every 6 months according to Bluescope Steel Technical Bulletin 4 for Colorbond, if you want to mantain your colorbond details, I have the ability to provide a soft wash service that will increase the durability of your external colorbond details. Well maintained Colorbond can look good for many years when maintained properly.
Rejuvination - A proper wash & scrub of building elements generally restores components, my rejuvenation works make a huge difference, can be much cheaper than conventional renovation, also more environmentally friendly as materials that last longer generally do not need to be replaced, replacement generally creates debris/waste that inturn commonly goes into landfill.
Return to Pest Control page for current pricing.
This site has been designed & created by Stephen Koelewyn
Not a Member of AEPMA Association.
I would love to hear from you. Call Steve